*XMG010a Industrial Grade High Quality Graphene Aqueous Slurry

*31021224-1 Industrial-grade high-quality thin-layer graphene aqueous slurry

Thickness: 3-5 nm

Diameter: 5-10 μm

Content: 5wt%

*31021224-2 Industrial-grade high-quality graphene aqueous slurry

Form: black paste

Solid content: 5.0 wt% (can be customized)

Thickness: 3-10 nm

Size: 5-10 μm

Specific surface area: 31.657 m²/g

Formulation: Surfactant, Pure Water

Remarks: Long-term storage is easy to precipitate, which is a normal phenomenon. Stir well before use.

*XMG010b Graphene conductive paste

*31021225-1 Graphene conductive paste (water-based)

Graphene platelets: 5 wt%

Graphene sheet diameter: 1-5 μm

Dispersant: 0.5 wt%

Water: 94.5 wt%

Application: The latest introduction of graphene water-based conductive paste, this product is based on high-conductivity thin-layer graphene micro-sheet water-based conductive paste, which can be used to improve the conductivity of lithium battery, lead-acid, and supercapacitor electrode materials and improve cycle stability. It can be used for water-based conductive, antistatic, anti-corrosion and waterproof coatings.

*31021225-2 Graphene conductive paste (oily)

Graphene platelets: 5 wt%

Graphene sheet diameter: 1-5 μm

Dispersant: 0.5 wt%

NMP: 94.5 wt%

Viscosity: ~3000 mPas

Application: The newly launched graphene conductive paste can be used in lithium iron phosphate, lithium cobalt oxide, lithium iron manganese phosphate and ternary material battery systems to increase the high-rate charge and discharge capacity of the battery and improve the cycle stability performance.

Instructions for use: This product must be stored in a dry and cool environment, away from high temperature fire or heat sources, and avoid direct sunlight. The product has a shelf life of 6 months under airtight conditions, try to use it within three days after opening the lid. There will be a little precipitation when placed for a long time, and it should be shaken or stirred evenly when using.

*31021225-3 Aqueous graphene slurry 8%

Solid content: 8%

Solvent: Water

Auxiliary content: 0.5%

Application: This product is a water-based conductive paste based on highly conductive thin-layer graphene micro-sheets, which can be used to improve the conductivity and cycle stability of lithium battery, lead-acid, and supercapacitor electrode materials. It can also be used for water-based conductive, antistatic, Anti-corrosion, waterproof coating.

*31021225-4 Aqueous graphene slurry 5% without additives

Solid content: 5%

Solvent: Water

Auxiliary content: none

Application: This product is a water-based conductive paste based on highly conductive thin-layer graphene micro-sheets, which can be used to improve the conductivity and cycle stability of lithium battery, lead-acid, and supercapacitor electrode materials. It can also be used for water-based conductive, antistatic, Anti-corrosion, waterproof coating.

*31021225-5 Aqueous graphene slurry 5%

Solid content: 5%

Solvent: Water

Auxiliary content: 0.5%

Application: This product is a water-based conductive paste based on highly conductive thin-layer graphene micro-sheets, which can be used to improve the conductivity and cycle stability of lithium battery, lead-acid, and supercapacitor electrode materials. It can also be used for water-based conductive, antistatic, Anti-corrosion, waterproof coating.

*31021225-6 Graphene water-based paste for paint and ink

Graphene content: 5 wt%

Additive content: 2 wt%

Sheet diameter: 1-5 μm

Solvent: Water

Viscosity: 5-15 mPa·s

Particle size: D50~7.9 μm D90~20 μm

Application: This product is a water-based conductive paste based on highly conductive thin-layer graphene microplates, which can be used in water-based conductive, anti-corrosion, waterproof coatings and conductive inks and other fields.

For internaltional orders, please ask us for quotes via

Email: contact@scimaterials.cn

Tel: +86 15375698751

Wechat: SCI-Materials-Hub

Clik here to put quick orders on our Alibaba shop

Worldwide shipping via DHL, SF-Express & other requested carriers.

Payments via Bank Transfer, Paypal, Credit card (via Alibaba), Alipay, Wechat-pay are accepted.

Partial references citing our materials (from Google Scholar)

Carbon Dioxide Reduction

1. ACS Nano Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO₂ Reduction

The bipolar membrane (Fumasep FBM) in this paper was purchased from SCI Materials Hub, which was used in rechargeable Zn-CO₂ battery tests. The authors reported a strain relaxation strategy to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realized an outstanding CO₂-to-CO Faradaic efficiency of 96.6% with outstanding activity and durability toward a Zn-CO₂ battery.

2. Front. Chem. Boosting Electrochemical Carbon Dioxide Reduction on Atomically Dispersed Nickel Catalyst

In this paper, Vulcan XC-72R was purchased from SCI Materials Hub. Vulcan XC 72R carbon is the most common catalyst support used in the anode and cathode electrodes of Polymer Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Microbial Fuel Cells (MFC), Phosphoric Acid Fuel Cells (PAFC), and many more!

3. Adv. Mater. Partially Nitrided Ni Nanoclusters Achieve Energy-Efficient Electrocatalytic CO₂ Reduction to CO at Ultralow Overpotential

An AEM membrane (Sustainion X37-50 Grade RT, purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.

4. Adv. Funct. Mater. Nanoconfined Molecular Catalysts in Integrated Gas Diffusion Electrodes for High-Current-Density CO₂ Electroreduction

In this paper (Supporting Information), an anion exchanged membrane (Fumasep FAB-PK-130 obtained from SCI Materials Hub (www.scimaterials.cn)) was used to separate the catholyte and anolyte chambers.

SCI Materials Hub: we also recommend our Fumasep FAB-PK-75 for the use in a flow cell.

5. Appl. Catal. B Efficient utilization of nickel single atoms for CO₂ electroreduction by constructing 3D interconnected nitrogen-doped carbon tube network

In this paper, the Nafion 117 membrane was obtained from SCI Materials Hub.

6. Vacuum Modulable Cu(0)/Cu(I)/Cu(II) sites of Cu/C catalysts derived from MOF for highly selective CO₂ electroreduction to hydrocarbons

In this paper, Proton exchange membrane (Nafion 117), Nafion D520, and Toray 060 carbon paper were purchased from SCI Materials Hub.

7. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

An anion exchange membrane (PiperION-A15-HCO3) was obtained from SCI Materials Hub.

8. Catalysis Communications Facilitating CO2 electroreduction to C2H4 through facile regulating {100} & {111} grain boundary of Cu2O

Carbon paper (TGPH060), membrane solution (Nafion D520), and ionic membrane (Nafion N117) were obtained from Wuhu Eryi Material Technology Co., Ltd (a company under SCI Materials Hub).

Batteries

1. J. Mater. Chem. A Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium–sulfur batteries

Graphene oxide (GO) in this paper was obtained from SCI Materials Hub. The authors introduced a Janus Fe3C/N-CNF@RGO electrode consisting of 1D Fe3C decorated N-doped carbon nanofibers (Fe3C/N-CNFs) side and 2D reduced graphene oxide (RGO) side as the free-standing carrier of Li2S6 catholyte to improve the overall electrochemical performance of Li-S batteries.

2. Joule A high-voltage and stable zinc-air battery enabled by dual-hydrophobic-induced proton shuttle shielding

This paper used more than 10 kinds of materials from SCI Materials Hub and the authors gave detailed properity comparsion.

The commercial IEMs of Fumasep FAB-PK-130 and Nafion N117 were obtained from SCI Materials Hub.

Gas diffusion layers of GDL340 (CeTech) and SGL39BC (Sigracet) and Nafion dispersion (Nafion D520) were obtained from SCI Materials Hub.

Zn foil (100 mm thickness) and Zn powder were obtained from the SCI Materials Hub.

Commercial 20% Pt/C, 40% Pt/C and IrO2 catalysts were also obtained from SCI Materials Hub.

3. Journal of Energy Chemistry Vanadium oxide nanospheres encapsulated in N-doped carbon nanofibers with morphology and defect dual-engineering toward advanced aqueous zinc-ion batteries

In this paper, carbon cloth (W0S1011) was obtained from SCI Materials Hub. The flexible carbon cloth matrix guaranteed the stabilization of the electrode and improved the conductivity of the cathode.

4. Energy Storage Materials Defect-abundant commercializable 3D carbon papers for fabricating composite Li anode with high loading and long life

The 3D carbon paper (TGPH060 raw paper) were purchased from SCI Materials Hub.

5. Nanomaterials A Stable Rechargeable Aqueous Zn–Air Battery Enabled by Heterogeneous MoS2 Cathode Catalysts

Nafion D520 (5 wt%), and carbon paper (GDL340) were received from SCI-Materials-Hub.

6. SSRN An Axially Directed Cobalt-Phthalocyanine Covalent Organic Polymer as High-Efficient Bifunctional Catalyst for Zn-Air Battery

Carbon cloth (W0S1011) and other electrochemical consumables required for air cathode were provided by SCI Materials Hub.

Oxygen Reduction Reaction

1. J. Chem. Eng. Superior Efficiency Hydrogen Peroxide Production in Acidic Media through Epoxy Group Adjacent to Co-O/C Active Centers on Carbon Black

In this paper, Vulcan XC 72 carbon black, ion membrane (Nafion N115, 127 μL), Nafion solution (D520, 5 wt%), and carbon paper (AvCarb GDS 2230 and Spectracarb 2050A-1050) were purchased from SCI Materials Hub.

2. Journal of Colloid and Interface Science Gaining insight into the impact of electronic property and interface electrostatic field on ORR kinetics in alloy engineering via theoretical prognostication and experimental validation

The 20 wt% Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) were purchased from SCI Materials Hub. This work places emphasis on the kinetics of the ORR concerning Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) catalysts, and integrates theoretical prognostication and experimental validation to illuminate the fundamental principles of alloy engineering.

Water Electrolysis

1. International Journal of Hydrogen Energy Gold as an efficient hydrogen isotope separation catalyst in proton exchange membrane water electrolysis

The cathodic catalysts of Pt/C (20 wt%, 2–3 nm) and Au/C (20 wt%, 4–5 nm) were purchased from SCI Materials Hub.

2. Small Science Silver Compositing Boosts Water Electrolysis Activity and Durability of RuO2 in a Proton-Exchange-Membrane Water Electrolyzer

Two fiber felts (0.35 mm thickness, SCI Materials Hub) were used as the porous transport layers at both the cathode and the anode.

3. Advanced Functional Materials Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry-Level Activity and Stability

Anion-exchange membrane (FAA-3-PK-130) was obtained from SCI Materials Hub website.

Fuel Cells

1. Polymer Sub-two-micron ultrathin proton exchange membrane with reinforced mechanical strength

Gas diffusion electrode (60% Pt/C, Carbon paper) was purchased from SCI Materials Hub.

Characterization

1. Chemical Engineering Journal Electrochemical reconstitution of Prussian blue analogue for coupling furfural electro-oxidation with photo-assisted hydrogen evolution reaction

An Au nanoparticle film was deposited on the total reflecting plane of a single reflection ATR crystal (SCI Materials Hub, Wuhu, China) via sputter coater.