CRRMEA10a 10cm2 Electrolyzer to Convert CO2 to CO is an electrochemical cell for carbon dioxide electrolysis to produce syngas, and can also be used for a variety of other electrochemical reactions.
Test Report - CRRMEA5a #0167 Signed.pdf
A complete electrolyzer with MEA in it and a test report can be provided if requested. A testing cost will apply on the complete electrolyzer.
These cells are assembled by our engineers & a leakage-sealing test is done for 72 hours before leaving our lab.
Customized electrochemical cells can be made upon requests.
The accessories include:
| Electrolyzer type | Components | Details |
| CRRMEA10a-1 | S13 Stainless steel cathode flow field plate (x1), TI2 Titanium anode flow field plate (x1) PTFE gasket set (x1), Stainless steel bolts+nuts+gaskets (x1 set), O-ring set (x1) Insulating sleeves+shoulder washers (x1 set)、PEEK bolts (x1 set) | |
| CRRMEA10a-2 | S13 Stainless steel cathode flow field plate (x1), TI2P Platinized Titanium anode flow field plate (x1) PTFE gasket set (x1), Stainless steel bolts+nuts+gaskets (x1 set), O-ring set (x1) Insulating sleeves+shoulder washers (x1 set)、PEEK bolts (x1 set) | |
| CRRMEA10a-3 | TI2 Titanium cathode flow field plate (x1), TI2 Titanium anode flow field plate (x1) PTFE gasket set (x1), Stainless steel bolts+nuts+gaskets (x1 set), O-ring set (x1) Insulating sleeves+shoulder washers (x1 set)、PEEK bolts (x1 set) | |
| CRRMEA10a-4 | TI2 Titanium cathode flow field plate (x1), TI2P Platinized Titanium anode flow field plate (x1) PTFE gasket set (x1), Stainless steel bolts+nuts+gaskets (x1 set), O-ring set (x1) Insulating sleeves+shoulder washers (x1 set)、PEEK bolts (x1 set) | |
| CRRMEA10a-5 | TI2 Titanium cathode flow field plate (x1), TI2 Titanium anode flow field plate (x1) PTFE gasket set (x1), Stainless steel bolts+nuts+gaskets (x1 set), O-ring set (x1) Insulating sleeves+shoulder washers (x1 set)、PEEK bolts (x1 set) | |
| CRRMEA10a-6 | TI2 Titanium cathode flow field plate (x1), TI2P Platinized Titanium anode flow field plate (x1) PTFE gasket set (x1), Stainless steel bolts+nuts+gaskets (x1 set), O-ring set (x1) Insulating sleeves+shoulder washers (x1 set)、PEEK bolts (x1 set) |
| Accessories | ||||
Cathode flow field |
S13 Stainless Steel |
|
TI2 Titanium | |
Anode flow field |
TI2 Titanium |
TI2 Titanium |
TI2 Platinized Titanium |
TI2 Platinized Titanium |
| AEM | PiperION A13 / PiperION A17 / PiperION A20 / PiperION A25 / PiperION A35 | |||
| Ionomer | Fumion FAA-3 5wt% in ethanol | |||
| GDL | CP-A210R raw carbon paper CP-A330R raw carbon paper CP-A400R raw carbon paper CP-H450R raw carbon paper CP-H850R raw carbon paper | Wet Proofed Carbon Paper (1-60wt% PTFE) CP-A210T/CP-A330T/CP-F200T/CP-F380T/CP-A400T/CP-H450T/CP-H850T | Wet proofed carbon paper with MPL CP-D220M/CP-B300M | 福优塞尔® Ti fiber paper 福优塞尔® Platinized Ti fiber paper |
| Anode GDE | DM IrO2-carbon paper 福优塞尔® E300 IrO2-carbon paper 福优塞尔® E300T IrO2-carbon paper with hydrophobic interface 福优塞尔® E300H IrO2-carbon paper with hydrophilic interface | 福优塞尔® E304T IrO2-Ti fiber paper with hydrophobic interface 福优塞尔® E304H IrO2-Ti fiber paper with hydrophilic interface 福优塞尔® E305T IrO2-Platinized Ti fiber paper with hydrophobic interface 福优塞尔® E305H IrO2-Platinized Ti fiber paper with hydrophilic interfac | 福优塞尔® E309 IrO2/Ti fiber paper 福优塞尔® E310 IrO2/Platinized Ti fiber paper 福优塞尔® E311 Pt-IrO2/Platinized Ti fiber paper | 福优塞尔® E314 IrO2/Ti screen 福优塞尔® E315 IrO2/Platinized Ti screen 福优塞尔® E316 Pt-IrO2/Platinized Ti screen |
福优塞尔® E320 IrO2/Ti foam 福优塞尔® E321 IrO2/Platinized Ti foam 福优塞尔® E322 Pt-IrO2/Platinized Ti foam | 福优塞尔® E330 Ir-carbon paper 福优塞尔® E330T Ir-carbon paper with hydrophobic interface 福优塞尔® E330H Ir-carbon paper with hydrophilic interface | 福优塞尔® E340T Ir-Ti fiber paper with hydrophobic interface 福优塞尔® E340H Ir-Ti fiber paper with hydrophilic interface 福优塞尔® E341T Ir-Platinized Ti fiber paper with hydrophobic interface 福优塞尔® E341H Ir-Platinized Ti fiber paper with hydrophilic interface | 福优塞尔® E343 Ir/Ti screen 福优塞尔® E344 Ir/Platinized Ti screen 福优塞尔® E345 Pt-Ir/Platinized Ti screen | |
福优塞尔® E347 Ir/Ti fiber paper 福优塞尔® E348 Ir/Platinized Ti fiber paper 福优塞尔® E349 Pt-Ir/Platinized Ti fiber paper | 福优塞尔® E351 Ir/Ti foam 福优塞尔® E352 Ir/Platinized Ti foam 福优塞尔® E353 Pt-Ir/Platinized Ti foam | |||
Cathode GDE | DM Ag-carbon paper 福优塞尔® E400 Ag-carbon paper | DM Cathode electrode for FA electrolyzer 福优塞尔® E410 Cathode electrode for FA electrolyzer | ||
| Gasket |
PTFE anode gasket (100/200/250/300/400/500/1000μm) (USD$23/each) |
PTFE cathode gasket (100/200/250/300/400/500/1000μm) (USD$23/each) |
FKM anode gasket (100/200/250/300/400/500/1000μm) (USD$23/each) |
FKM cathode gasket (100/200/250/300/400/500/1000μm) (USD$23/each) |
| Tube |
PE tube (ID1/16" OD1/8") (USD$2/m) |
Silicone tube (ID1.6mm/OD4.8mm) (USD$2/m) |
Teflon tube (ID1/16" OD1/8") (USD$10/m) |
tube (ID1.6mm/OD4.8mm) (USD$50/m) |
| Connectors |
ABS bolts (ID1/8"), $10/set |
PTFE bolts (ID1/8"), $15/set |
PTFE bolts (ID1/8"), $20/set |
Nickel bolts (ID1/8"), $20/set |
| Others |  SS nuts, $2/set |
SS spacers, $2/set |
SS springs, $2/set |
Torque wrench with sleeve (1-25 Nm), $100/set |
SS bolts, $2/set |
Spacers, $2/set |
Insulators (T0.5mm), $2/set |
Insulators (T1mm), $2/set | |
25A High current DC electrical lead pair - Alligator Clip $10/pair/0.5m; $15/pair/1m $20/pair/1.5m; $25/pair/2m |
25A High current DC electrical lead pair - Banana plug to Alligator Clip $10/pair/0.5m; $15/pair/1m $20/pair/1.5m; $25/pair/2m |
35A High current DC electrical lead pair - Banana plug to Alligator Clip $15/pair/0.5m; 20/pair/1m $25/pair/1.5m; $30/pair/2m |
40A High current DC electrical lead pair - Ring to Ring $20/pair/0.5m; 25/pair/1m $30/pair/1.5m; $35/pair/2m | |
Temperature controller, $699 (Accuracy: 0.1°C) |
Heating pads ($97/pair) Heating pad binder, $50/25ml |
O rings, $2/set |
Wrench kit, $10/set | |
VHP01 vacuum heater |
Cu conductors, $1/set | Small peristaltic pump, $300/pc Standard peristaltic pump, $400/pc Standard peristaltic pump with two channels, $700/pc Gear pump, $700/pc | DC power supply with data recording, storage, and export functions, $3000/pc | |
Humidifier Kit, USD$24 |
Humidifier with 6 PSI safety valve, USD$69 | * Mass flow controller with reader (CO2, 500sccm), USD$1500 ** Mass flow controller with Modbus RS485 Communication (CO2, 500sccm), USD$2000 | ||
For international orders, please ask us for quotes via
Email: contact@scimaterials.cn
Tel: +86 153-5789-9751
Partial references citing our materials (from Google Scholar)
Carbon Dioxide Reduction
1. ACS Nano Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO2 Reduction
The bipolar membrane (Fumasep FBM) in this paper was purchased from SCI Materials Hub, which was used in rechargeable Zn-CO2 battery tests. The authors reported a strain relaxation strategy to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realized an outstanding CO2-to-CO Faradaic efficiency of 96.6% with outstanding activity and durability toward a Zn-CO2 battery.
2. Front. Chem. Boosting Electrochemical Carbon Dioxide Reduction on Atomically Dispersed Nickel Catalyst
In this paper, Vulcan XC-72R was purchased from SCI Materials Hub. Vulcan XC 72R carbon is the most common catalyst support used in the anode and cathode electrodes of Polymer Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Microbial Fuel Cells (MFC), Phosphoric Acid Fuel Cells (PAFC), and many more!
3. Adv. Mater. Partially Nitrided Ni Nanoclusters Achieve Energy-Efficient Electrocatalytic CO2 Reduction to CO at Ultralow Overpotential
An AEM membrane (Sustainion X37-50 Grade RT, purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.
4. Adv. Funct. Mater. Nanoconfined Molecular Catalysts in Integrated Gas Diffusion Electrodes for High-Current-Density CO2 Electroreduction
In this paper (Supporting Information), an anion exchanged membrane (Fumasep FAB-PK-130 obtained from SCI Materials Hub (www.scimaterials.cn)) was used to separate the catholyte and anolyte chambers.
SCI Materials Hub: we also recommend our Fumasep FAB-PK-75 for the use in a flow cell.
5. Appl. Catal. B Efficient utilization of nickel single atoms for CO2 electroreduction by constructing 3D interconnected nitrogen-doped carbon tube network
In this paper, the Nafion 117 membrane was obtained from SCI Materials Hub.
In this paper, Proton exchange membrane (Nafion 117), Nafion D520, and Toray 060 carbon paper were purchased from SCI Materials Hub.
7. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways
An anion exchange membrane (PiperION-A15-HCO3) was obtained from SCI Materials Hub.
8. Catalysis Communications Facilitating CO2 electroreduction to C2H4 through facile regulating {100} & {111} grain boundary of Cu2O
Carbon paper (TGPH060), membrane solution (Nafion D520), and ionic membrane (Nafion N117) were obtained from Wuhu Eryi Material Technology Co., Ltd (a company under SCI Materials Hub).
Batteries
1. J. Mater. Chem. A Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium–sulfur batteries
Graphene oxide (GO) in this paper was obtained from SCI Materials Hub. The authors introduced a Janus Fe3C/N-CNF@RGO electrode consisting of 1D Fe3C decorated N-doped carbon nanofibers (Fe3C/N-CNFs) side and 2D reduced graphene oxide (RGO) side as the free-standing carrier of Li2S6 catholyte to improve the overall electrochemical performance of Li-S batteries.
This paper used more than 10 kinds of materials from SCI Materials Hub and the authors gave detailed properity comparsion.
The commercial IEMs of Fumasep FAB-PK-130 and Nafion N117 were obtained from SCI Materials Hub.
Gas diffusion layers of GDL340 (CeTech) and SGL39BC (Sigracet) and Nafion dispersion (Nafion D520) were obtained from SCI Materials Hub.
Zn foil (100 mm thickness) and Zn powder were obtained from the SCI Materials Hub.
Commercial 20% Pt/C, 40% Pt/C and IrO2 catalysts were also obtained from SCI Materials Hub.
3. Journal of Energy Chemistry Vanadium oxide nanospheres encapsulated in N-doped carbon nanofibers with morphology and defect dual-engineering toward advanced aqueous zinc-ion batteries
In this paper, carbon cloth (W0S1011) was obtained from SCI Materials Hub. The flexible carbon cloth matrix guaranteed the stabilization of the electrode and improved the conductivity of the cathode.
4. Energy Storage Materials Defect-abundant commercializable 3D carbon papers for fabricating composite Li anode with high loading and long life
The 3D carbon paper (TGPH060 raw paper) were purchased from SCI Materials Hub.
5. Nanomaterials A Stable Rechargeable Aqueous Zn–Air Battery Enabled by Heterogeneous MoS2 Cathode Catalysts
Nafion D520 (5 wt%), and carbon paper (GDL340) were received from SCI-Materials-Hub.
Carbon cloth (W0S1011) and other electrochemical consumables required for air cathode were provided by SCI Materials Hub.
Oxygen Reduction Reaction
1. J. Chem. Eng. Superior Efficiency Hydrogen Peroxide Production in Acidic Media through Epoxy Group Adjacent to Co-O/C Active Centers on Carbon Black
In this paper, Vulcan XC 72 carbon black, ion membrane (Nafion N115, 127 μL), Nafion solution (D520, 5 wt%), and carbon paper (AvCarb GDS 2230 and Spectracarb 2050A-1050) were purchased from SCI Materials Hub.
2. Journal of Colloid and Interface Science Gaining insight into the impact of electronic property and interface electrostatic field on ORR kinetics in alloy engineering via theoretical prognostication and experimental validation
The 20 wt% Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) were purchased from SCI Materials Hub. This work places emphasis on the kinetics of the ORR concerning Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) catalysts, and integrates theoretical prognostication and experimental validation to illuminate the fundamental principles of alloy engineering.
Water Electrolysis
1. International Journal of Hydrogen Energy Gold as an efficient hydrogen isotope separation catalyst in proton exchange membrane water electrolysis
The cathodic catalysts of Pt/C (20 wt%, 2–3 nm) and Au/C (20 wt%, 4–5 nm) were purchased from SCI Materials Hub.
2. Small Science Silver Compositing Boosts Water Electrolysis Activity and Durability of RuO2 in a Proton-Exchange-Membrane Water Electrolyzer
Two fiber felts (0.35 mm thickness, SCI Materials Hub) were used as the porous transport layers at both the cathode and the anode.
3. Advanced Functional Materials Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry-Level Activity and Stability
Anion-exchange membrane (FAA-3-PK-130) was obtained from SCI Materials Hub website.
Fuel Cells
1. Polymer Sub-two-micron ultrathin proton exchange membrane with reinforced mechanical strength
Gas diffusion electrode (60% Pt/C, Carbon paper) was purchased from SCI Materials Hub.
Characterization
1. Chemical Engineering Journal Electrochemical reconstitution of Prussian blue analogue for coupling furfural electro-oxidation with photo-assisted hydrogen evolution reaction
An Au nanoparticle film was deposited on the total reflecting plane of a single reflection ATR crystal (SCI Materials Hub, Wuhu, China) via sputter coater.
|
We Provide A Broad Range of Materials, Instruments & Solutions in Advanced Science and Technologies | About Us |
TI2 Titanium
