Carbon Paper with One-Side Hydrophilic Treated & The Other Side Wet Proofed MPL Treated with MPL stands for a carbon paper with a combination of hydrophilic-hydrophobic properties along with a microporous layer (MPL). It has one-side hydrophilic surface and one-side hydrophobic surface with MPL.
Here's a breakdown of each component:
Hydrophilic-Hydrophobic Properties: This refers to the surface characteristics of the carbon paper, where different regions or coatings exhibit either hydrophilic (water-attracting) or hydrophobic (water-repelling) behavior. This combination allows for controlled wetting behavior, where specific areas attract or repel water as needed for various applications.
Microporous Layer (MPL): The MPL is a thin, porous layer typically added to one or both sides of the carbon paper. It serves multiple functions, including:
- Providing a uniform and high surface area for gas diffusion in applications such as fuel cells.
- Enhancing water management by facilitating water transport and distribution across the surface.
- Improving the adhesion of catalyst layers or other functional coatings to the carbon paper substrate.
- Acting as a barrier to prevent flooding or water penetration into the substrate, particularly in fuel cell applications.
The hydrophilic-hydrophobic properties combined with the MPL offer several advantages in various applications:
Fuel Cells: The MPL facilitates gas diffusion and water management within the gas diffusion layer (GDL) of the fuel cell. The hydrophilic-hydrophobic properties help maintain proper water balance by attracting water to certain regions and repelling it from others, while the MPL ensures efficient gas transport and prevents flooding.
Water Treatment: In membranes for water treatment applications, the hydrophilic-hydrophobic carbon paper with MPL can be utilized to control water permeation and fouling. The hydrophilic regions attract water and facilitate its transport, while the hydrophobic regions and MPL prevent fouling by repelling contaminants and maintaining porosity.
Microfluidics: This type of carbon paper can be employed in microfluidic devices where precise fluid handling is required. The hydrophilic-hydrophobic properties control liquid flow, while the MPL enhances fluid transport and provides a stable substrate for channel formation.
Overall, hydrophilic-hydrophobic carbon paper with MPL offers versatility in managing water interactions and gas diffusion, making it suitable for a wide range of applications, including fuel cells, water treatment membranes, and microfluidic devices.
For international orders, please ask us for quotes via
Email: contact@scimaterials.cn
Tel: +86 130-0303-8751 / +86 156-0553-2352
Wechat: SCI-Materials-Hub
Clik here to put quick orders on our Alibaba / Amazon / ebay store.
TGPH060HM Carbon Paper with One-Side Hydrophilic Treated & The Other Side Wet Proofed MPL Treated
|
| Product Code | Description | Price and Specifications | Lead Time |
| 1 mg/cm2 MPL with 20wt% PTFE for MPL, No PTFE for carbon paper | $125 (5*5cm) $250 (10*10cm) | 3-7 days |
| 1 mg/cm2 MPL with 20wt% PTFE for MPL, 1wt% PTFE for one-side carbon paper | $125 (5*5cm) $250 (10*10cm) | 3-7 days |
|
1 mg/cm2 MPL with 30wt% PTFE for MPL, 1wt% PTFE for one-side carbon paper
| $140 (5*5cm)
$280 (10*10cm) | 3-7 days |
|
1.5 mg/cm2 MPL with 20wt% PTFE for MPL, 1wt% PTFE for one-side carbon paper | $170 (5*5cm) $340 (10*10cm) | 3-7 days |
|
1.5 mg/cm2 MPL with 30wt% PTFE for MPL, 1wt% PTFE for one-side carbon paper
| $190 (5*5cm)
$380 (10*10cm) | 3-7 days |
|
2 mg/cm2 MPL with 20wt% PTFE for MPL, 1wt% PTFE for one-side carbon paper
| $250 (5*5cm) $500 (10*10cm) | 3-7 days |
|
2 mg/cm2 MPL with 30wt% PTFE for MPL, 1wt% PTFE for one-side carbon paper
| $270 (5*5cm)
$540 (10*10cm) | 3-7 days |
| SCI Materials Hub is Committed to Offering The Best Price & Customer Services! |
Carbon paper with MPL can be customized with the following options:
MPL loading: 1-4 mg/cm2
PTFE for carbon paper: 1-50 wt%
PTFE for MPL: 1-50 wt%
Worldwide shipping via DHL, SF-Express & other requested carriers.
Payments via Bank Transfer, Paypal, Credit card (via Taobao), Alipay, Wechat-pay are accepted.
Partial references citing our materials (from Google Scholar)
Carbon Dioxide Reduction
1. ACS Nano Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO2 Reduction
The bipolar membrane (Fumasep FBM) in this paper was purchased from SCI Materials Hub, which was used in rechargeable Zn-CO2 battery tests. The authors reported a strain relaxation strategy to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realized an outstanding CO2-to-CO Faradaic efficiency of 96.6% with outstanding activity and durability toward a Zn-CO2 battery.
2. Front. Chem. Boosting Electrochemical Carbon Dioxide Reduction on Atomically Dispersed Nickel Catalyst
In this paper, Vulcan XC-72R was purchased from SCI Materials Hub. Vulcan XC 72R carbon is the most common catalyst support used in the anode and cathode electrodes of Polymer Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Microbial Fuel Cells (MFC), Phosphoric Acid Fuel Cells (PAFC), and many more!
3. Adv. Mater. Partially Nitrided Ni Nanoclusters Achieve Energy-Efficient Electrocatalytic CO2 Reduction to CO at Ultralow Overpotential
An AEM membrane (Sustainion X37-50 Grade RT, purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.
4. Adv. Funct. Mater. Nanoconfined Molecular Catalysts in Integrated Gas Diffusion Electrodes for High-Current-Density CO2 Electroreduction
In this paper (Supporting Information), an anion exchanged membrane (Fumasep FAB-PK-130 obtained from SCI Materials Hub (www.scimaterials.cn)) was used to separate the catholyte and anolyte chambers.
SCI Materials Hub: we also recommend our Fumasep FAB-PK-75 for the use in a flow cell.
5. Appl. Catal. B Efficient utilization of nickel single atoms for CO2 electroreduction by constructing 3D interconnected nitrogen-doped carbon tube network
In this paper, the Nafion 117 membrane was obtained from SCI Materials Hub.
6. Vacuum Modulable Cu(0)/Cu(I)/Cu(II) sites of Cu/C catalysts derived from MOF for highly selective CO2 electroreduction to hydrocarbons
In this paper, Proton exchange membrane (Nafion 117), Nafion D520, and Toray 060 carbon paper were purchased from SCI Materials Hub.
7. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways
An anion exchange membrane (PiperION-A15-HCO3) was obtained from SCI Materials Hub.
8. Catalysis Communications Facilitating CO2 electroreduction to C2H4 through facile regulating {100} & {111} grain boundary of Cu2O
Carbon paper (TGPH060), membrane solution (Nafion D520), and ionic membrane (Nafion N117) were obtained from Wuhu Eryi Material Technology Co., Ltd (a company under SCI Materials Hub).
Batteries
1. J. Mater. Chem. A Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium–sulfur batteries
Graphene oxide (GO) in this paper was obtained from SCI Materials Hub. The authors introduced a Janus Fe3C/N-CNF@RGO electrode consisting of 1D Fe3C decorated N-doped carbon nanofibers (Fe3C/N-CNFs) side and 2D reduced graphene oxide (RGO) side as the free-standing carrier of Li2S6 catholyte to improve the overall electrochemical performance of Li-S batteries.
2. Joule A high-voltage and stable zinc-air battery enabled by dual-hydrophobic-induced proton shuttle shielding
This paper used more than 10 kinds of materials from SCI Materials Hub and the authors gave detailed properity comparsion.
The commercial IEMs of Fumasep FAB-PK-130 and Nafion N117 were obtained from SCI Materials Hub.
Gas diffusion layers of GDL340 (CeTech) and SGL39BC (Sigracet) and Nafion dispersion (Nafion D520) were obtained from SCI Materials Hub.
Zn foil (100 mm thickness) and Zn powder were obtained from the SCI Materials Hub.
Commercial 20% Pt/C, 40% Pt/C and IrO2 catalysts were also obtained from SCI Materials Hub.
3. Journal of Energy Chemistry Vanadium oxide nanospheres encapsulated in N-doped carbon nanofibers with morphology and defect dual-engineering toward advanced aqueous zinc-ion batteries
In this paper, carbon cloth (W0S1011) was obtained from SCI Materials Hub. The flexible carbon cloth matrix guaranteed the stabilization of the electrode and improved the conductivity of the cathode.
4. Energy Storage Materials Defect-abundant commercializable 3D carbon papers for fabricating composite Li anode with high loading and long life
The 3D carbon paper (TGPH060 raw paper) were purchased from SCI Materials Hub.
5. Nanomaterials A Stable Rechargeable Aqueous Zn–Air Battery Enabled by Heterogeneous MoS2 Cathode Catalysts
Nafion D520 (5 wt%), and carbon paper (GDL340) were received from SCI-Materials-Hub.
6. SSRN An Axially Directed Cobalt-Phthalocyanine Covalent Organic Polymer as High-Efficient Bifunctional Catalyst for Zn-Air Battery
Carbon cloth (W0S1011) and other electrochemical consumables required for air cathode were provided by SCI Materials Hub.
Oxygen Reduction Reaction
1. J. Chem. Eng. Superior Efficiency Hydrogen Peroxide Production in Acidic Media through Epoxy Group Adjacent to Co-O/C Active Centers on Carbon Black
In this paper, Vulcan XC 72 carbon black, ion membrane (Nafion N115, 127 μL), Nafion solution (D520, 5 wt%), and carbon paper (AvCarb GDS 2230 and Spectracarb 2050A-1050) were purchased from SCI Materials Hub.
2. Journal of Colloid and Interface Science Gaining insight into the impact of electronic property and interface electrostatic field on ORR kinetics in alloy engineering via theoretical prognostication and experimental validation
The 20 wt% Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) were purchased from SCI Materials Hub. This work places emphasis on the kinetics of the ORR concerning Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) catalysts, and integrates theoretical prognostication and experimental validation to illuminate the fundamental principles of alloy engineering.
Water Electrolysis
1. International Journal of Hydrogen Energy Gold as an efficient hydrogen isotope separation catalyst in proton exchange membrane water electrolysis
The cathodic catalysts of Pt/C (20 wt%, 2–3 nm) and Au/C (20 wt%, 4–5 nm) were purchased from SCI Materials Hub.
2. Small Science Silver Compositing Boosts Water Electrolysis Activity and Durability of RuO2 in a Proton-Exchange-Membrane Water Electrolyzer
Two fiber felts (0.35 mm thickness, SCI Materials Hub) were used as the porous transport layers at both the cathode and the anode.
3. Advanced Functional Materials Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry-Level Activity and Stability
Anion-exchange membrane (FAA-3-PK-130) was obtained from SCI Materials Hub website.
Fuel Cells
1. Polymer Sub-two-micron ultrathin proton exchange membrane with reinforced mechanical strength
Gas diffusion electrode (60% Pt/C, Carbon paper) was purchased from SCI Materials Hub.
Characterization
1. Chemical Engineering Journal Electrochemical reconstitution of Prussian blue analogue for coupling furfural electro-oxidation with photo-assisted hydrogen evolution reaction
An Au nanoparticle film was deposited on the total reflecting plane of a single reflection ATR crystal (SCI Materials Hub, Wuhu, China) via sputter coater.
