Platinum Wire Salt Bridge Electrode | Product Details

ELECTROCHEMICAL RESEARCH MATERIALS

Platinum Wire Salt Bridge Electrode

A platinum wire electrode assembly for salt bridge connections, ion-conduction pathways, and electrochemical equipment. Multiple platinum wire lengths are available for different laboratory vessels.

Product Overview

The platinum wire salt bridge electrode uses platinum wire as the conductive terminal and forms a stable connection with the electrolyte through a salt bridge structure. It is suitable for research testing, teaching experiments, and customized electrochemical equipment.

Product TypePlatinum Wire Salt Bridge Electrode

Wire SpecificationsΦ0.5 × 50 / 70 / 150 mm

ApplicationSalt bridge connections and electrochemical testing

Applications

Conductive connections in salt bridge electrochemical equipment.
Two-compartment electrochemical cells, separated electrolysis cells, and related laboratory components.
Electrochemical teaching, ion migration studies, and reaction mechanism research.
Customized laboratory equipment requiring a slim conductive terminal.

Instructions for Use

Select the appropriate platinum wire specification according to the salt bridge length, cell depth, and installation position.
Place the platinum wire terminal in the designed position. Ensure effective contact with the electrolyte and avoid contact with the vessel.
Secure the electrode with a fixture or sealing structure and keep the connection stable.
Remove and clean the electrode after the experiment. Store it only after it is completely dry.

Cleaning and Maintenance

Rinse the platinum wire surface with deionized water before use.
If oil or grease is present, clean it with acetone and then rinse thoroughly with deionized water.
Avoid sharp bends, pulling, and scratching the platinum wire with sharp tools.
For long-term storage, keep the electrode dry and package it separately to prevent contact with other metals.

Frequently Asked Questions

How should I choose the platinum wire length?

Use the salt bridge structure and vessel depth as the main references, ensuring that the active wire terminal can contact the electrolyte stably.

Can the platinum wire be reused?

Yes. Clean and store it properly after each experiment. Replace it if the surface shows obvious damage.

Can other lengths be customized?

The listed sizes are common specifications. Special lengths or structures can be confirmed according to the equipment dimensions and installation method.

What precautions are required during use?

Avoid bending, excessive stretching, and friction against the vessel wall. Confirm that the salt bridge connection is reliably sealed.

Platinum Wire Salt Bridge Electrode ' Specifications and Prices

PRECIOUS METAL ELECTROCHEMICAL MATERIALS

Platinum Wire Salt Bridge Electrode

Made with high-purity platinum wire for salt bridge connections, ion-conduction pathways, and electrochemical equipment.

Specifications and Price Table

Product Name	Platinum Wire Specification	Platinum Purity	Application	Sale Price (USD)
Platinum Wire Salt Bridge Electrode	Φ0.5 × 50 mm	Pt ≥ 99.99%	Salt bridge connections and electrochemical equipment	$99
	Φ0.5 × 70 mm			$180
	Φ0.5 × 150 mm			$187

Platinum wire length can be customized according to the salt bridge structure, cell depth, and installation method. USD prices are calculated as the CNY price divided by 5 and rounded to the nearest whole dollar.

Purchase Channels

Amazon

Browse standard platinum wire lengths for salt bridge and electrochemical applications.

Amazon

eBay

Suitable for laboratory, teaching, and research procurement.

eBay

AliExpress

Contact us for customized wire lengths, structures, and installation requirements.

AliExpress

Partial references citing our materials (from Google Scholar)

Google Scholar - SCI Materials Hub.jpg

Carbon Dioxide Reduction

1. ACS Nano Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO₂ Reduction

The bipolar membrane (Fumasep FBM) in this paper was purchased from SCI Materials Hub, which was used in rechargeable Zn-CO₂ battery tests. The authors reported a strain relaxation strategy to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realized an outstanding CO₂-to-CO Faradaic efficiency of 96.6% with outstanding activity and durability toward a Zn-CO₂ battery.

2. Front. Chem. Boosting Electrochemical Carbon Dioxide Reduction on Atomically Dispersed Nickel Catalyst

In this paper, Vulcan XC-72R was purchased from SCI Materials Hub. Vulcan XC 72R carbon is the most common catalyst support used in the anode and cathode electrodes of Polymer Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Microbial Fuel Cells (MFC), Phosphoric Acid Fuel Cells (PAFC), and many more!

3. Adv. Mater. Partially Nitrided Ni Nanoclusters Achieve Energy-Efficient Electrocatalytic CO₂ Reduction to CO at Ultralow Overpotential

An AEM membrane (Sustainion X37-50 Grade RT, purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.

4. Adv. Funct. Mater. Nanoconfined Molecular Catalysts in Integrated Gas Diffusion Electrodes for High-Current-Density CO₂ Electroreduction

In this paper (Supporting Information), an anion exchanged membrane (Fumasep FAB-PK-130 obtained from SCI Materials Hub (www.scimaterials.cn)) was used to separate the catholyte and anolyte chambers.

SCI Materials Hub: we also recommend our Fumasep FAB-PK-75 for the use in a flow cell.

5. Appl. Catal. B Efficient utilization of nickel single atoms for CO₂ electroreduction by constructing 3D interconnected nitrogen-doped carbon tube network

In this paper, the Nafion 117 membrane was obtained from SCI Materials Hub.

6. Vacuum Modulable Cu(0)/Cu(I)/Cu(II) sites of Cu/C catalysts derived from MOF for highly selective CO₂ electroreduction to hydrocarbons

In this paper, Proton exchange membrane (Nafion 117), Nafion D520, and Toray 060 carbon paper were purchased from SCI Materials Hub.

7. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

An anion exchange membrane (PiperION-A15-HCO3) was obtained from SCI Materials Hub.

8. Catalysis Communications Facilitating CO2 electroreduction to C2H4 through facile regulating {100} & {111} grain boundary of Cu2O

Carbon paper (TGPH060), membrane solution (Nafion D520), and ionic membrane (Nafion N117) were obtained from Wuhu Eryi Material Technology Co., Ltd (a company under SCI Materials Hub).

Batteries

1. J. Mater. Chem. A Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium–sulfur batteries

Graphene oxide (GO) in this paper was obtained from SCI Materials Hub. The authors introduced a Janus Fe3C/N-CNF@RGO electrode consisting of 1D Fe3C decorated N-doped carbon nanofibers (Fe3C/N-CNFs) side and 2D reduced graphene oxide (RGO) side as the free-standing carrier of Li2S6 catholyte to improve the overall electrochemical performance of Li-S batteries.

2. Joule A high-voltage and stable zinc-air battery enabled by dual-hydrophobic-induced proton shuttle shielding

This paper used more than 10 kinds of materials from SCI Materials Hub and the authors gave detailed properity comparsion.

The commercial IEMs of Fumasep FAB-PK-130 and Nafion N117 were obtained from SCI Materials Hub.

Gas diffusion layers of GDL340 (CeTech) and SGL39BC (Sigracet) and Nafion dispersion (Nafion D520) were obtained from SCI Materials Hub.

Zn foil (100 mm thickness) and Zn powder were obtained from the SCI Materials Hub.

Commercial 20% Pt/C, 40% Pt/C and IrO2 catalysts were also obtained from SCI Materials Hub.

3. Journal of Energy Chemistry Vanadium oxide nanospheres encapsulated in N-doped carbon nanofibers with morphology and defect dual-engineering toward advanced aqueous zinc-ion batteries

In this paper, carbon cloth (W0S1011) was obtained from SCI Materials Hub. The flexible carbon cloth matrix guaranteed the stabilization of the electrode and improved the conductivity of the cathode.

4. Energy Storage Materials Defect-abundant commercializable 3D carbon papers for fabricating composite Li anode with high loading and long life

The 3D carbon paper (TGPH060 raw paper) were purchased from SCI Materials Hub.

5. Nanomaterials A Stable Rechargeable Aqueous Zn–Air Battery Enabled by Heterogeneous MoS2 Cathode Catalysts

Nafion D520 (5 wt%), and carbon paper (GDL340) were received from SCI-Materials-Hub.

6. SSRN An Axially Directed Cobalt-Phthalocyanine Covalent Organic Polymer as High-Efficient Bifunctional Catalyst for Zn-Air Battery

Carbon cloth (W0S1011) and other electrochemical consumables required for air cathode were provided by SCI Materials Hub.

Oxygen Reduction Reaction

1. J. Chem. Eng. Superior Efficiency Hydrogen Peroxide Production in Acidic Media through Epoxy Group Adjacent to Co-O/C Active Centers on Carbon Black

In this paper, Vulcan XC 72 carbon black, ion membrane (Nafion N115, 127 μL), Nafion solution (D520, 5 wt%), and carbon paper (AvCarb GDS 2230 and Spectracarb 2050A-1050) were purchased from SCI Materials Hub.

2. Journal of Colloid and Interface Science Gaining insight into the impact of electronic property and interface electrostatic field on ORR kinetics in alloy engineering via theoretical prognostication and experimental validation

The 20 wt% Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) were purchased from SCI Materials Hub. This work places emphasis on the kinetics of the ORR concerning Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) catalysts, and integrates theoretical prognostication and experimental validation to illuminate the fundamental principles of alloy engineering.

Water Electrolysis

1. International Journal of Hydrogen Energy Gold as an efficient hydrogen isotope separation catalyst in proton exchange membrane water electrolysis

The cathodic catalysts of Pt/C (20 wt%, 2–3 nm) and Au/C (20 wt%, 4–5 nm) were purchased from SCI Materials Hub.

2. Small Science Silver Compositing Boosts Water Electrolysis Activity and Durability of RuO2 in a Proton-Exchange-Membrane Water Electrolyzer

Two fiber felts (0.35 mm thickness, SCI Materials Hub) were used as the porous transport layers at both the cathode and the anode.

3. Advanced Functional Materials Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry-Level Activity and Stability

Anion-exchange membrane (FAA-3-PK-130) was obtained from SCI Materials Hub website.

Fuel Cells

1. Polymer Sub-two-micron ultrathin proton exchange membrane with reinforced mechanical strength

Gas diffusion electrode (60% Pt/C, Carbon paper) was purchased from SCI Materials Hub.

Characterization

1. Chemical Engineering Journal Electrochemical reconstitution of Prussian blue analogue for coupling furfural electro-oxidation with photo-assisted hydrogen evolution reaction

An Au nanoparticle film was deposited on the total reflecting plane of a single reflection ATR crystal (SCI Materials Hub, Wuhu, China) via sputter coater.