Welcome to the SCI Materials Hub !
Home > AvCarb > MGL carbon paper > AvCarb MGL190T Teflon Treated

AvCarb MGL190T Teflon Treated

  • Product Code:113001(5), 113001(10), 113001(20), 113001(30), 113001(40), 113001(50)
  • Description:AvCarb MGL190T Teflon Treated
  • Brand:AvCarb
  • Lead time:1 day
  • Views:
  • Telephone:+86 153-5789-9751
  • Keywords:AvCarb MGL190T Teflon Treated, SCI Materials Hub
65.7K

1. Introduction

The base of Teflon treated carbon paper is AvCarb MGL190.

AvCarb MGL190 is a superior carbon paper for fuel cell and electrolyzer applications.

MGL190 demonstrates advantages over industry standard products such as Toray 060, including:

- Lower electrical resistivity

- Higher flexural/tensile strength

- Improved thickness uniformity

- Higher purity; improved durability

- USA Made


We offer a wide range of Teflon treatments from 5% to 50%, currently we have AvCarb MGL190 10wt% Teflon-treated in stock.


2. Suggested Uses

- Electrolyzers

- Flow batteries

- Fuel cells

- Corrosive Environments


3. Welcome to cite our materials in your papers

AvCarb MGL190 10wt% Teflon-treated carbon fiber paper with a thickness of 0.19 mm was obtained from SCI Materials Hub.


4. AvCarb carbon fiber paper series in SCI Materials Hub

AvCarb GDL carbon paper series
ModeMateirals TypeThickness

Air Permeability

(Gurley) through-plane

Air Permeability

(Gurley) in-plane

Through-Plane ResistivityPTFE Treatment
EP40Carbon Paper Substrate0.2mm4.5 sec/100cc50.9 sec/100cc8.0 mOhm*cm2None
EP40TCarbon Paper Substrate0.2mm7.5 sec/100cc75 sec/100cc13.0 mOhm*cm25-50wt%
EP55Carbon Paper Substrate0.262mm5.0 sec/100cc----None
P50Carbon Paper Substrate0.17mm35 sec/100cc295 sec/100cc6.7 mOhm*cm2None
P50TCarbon Paper Substrate0.18mm50 sec/100cc596 sec/100cc11.7 mOhm*cm25-50wt%
P75Carbon Paper Substrate0.245mm15 sec/100cc83 sec/100cc7.8 mOhm*cm2None
P75TCarbon Paper Substrate0.255mm25 sec/100cc26 sec/100cc13.4 mOhm*cm25-50wt%
AvCarb MGL carbon paper series
ModeMateirals TypeThickness

Gas Permeability

(Gurley sec)

Electrical Resistivity

(through plane)

PorosityPTFE Treatment
MGL190Molded Graphite Laminate0.19mm2.275 mOhm cm78%None
MGL190 TeflonMolded Graphite Laminate0.19mm2.275 mOhm cm78%5-50wt%
MGL280Molded Graphite Laminate0.28mm3.375 mOhm cm78%None
MGL280 TeflonMolded Graphite Laminate0.28mm3.375 mOhm cm78%5-50wt%
MGL370Molded Graphite Laminate0.37mm4.475 mOhm cm78%None
MGL370 TeflonMolded Graphite Laminate0.37mm4.475 mOhm cm78%5-50wt%


Download:

Avcarb MGL Carbon Paper Specification.pdf

AvCarb Molded Graphite Laminate (MGL) Carbon Paper Properties Sheet.pdf


AvCarb Molded Graphite Laminate Properties
Material TypeMolded Graphite Laminate
Thickness (@50kPa)0.19 mm (190 microns)
Bulk Density0.44 g/cm3
Porosity78%
Gas Permeability (ml*mm / (cm2*hr*mmaq))1900
Gas Permeability (Gurley sec)2.2
Electrical Resistivity (through plane)75 mOhm cm
Flexural Strength45 MPa
Flexural Modulus15 GPa
Tensile Strength65 N/cm
PTFE Treatment5wt%, 10wt%, 20wt%, 30wt%, 40wt%, 50wt%
Microporous Layer (MPL)None


AvCarb Molded Graphite Laminates (MGL) are superior carbon papers designed for electrolyzer and fuel cell applications. Available in stronger and thicker product formats than typical carbon papers, AvCarb MGLs provide electrochemists with a highly durable electrode backing intended for harsh environments.

With comparable property and performance data, MGL products can be used interchangeably with other industry standard carbon papers. Available in thicknesses ranging from 0.19mm to 0.37mm, these highly graphitic panels are manufactured under both heat and pressure.

This process results in a carbon structure that is porous, gas permeable, and is electrochemically active. MGLs have been used for many years in both commercial and military applications around the world with new applications being developed every year.


Application in flow batteries

Energy produced from renewable sources like wind, solar and hydroelectric plants promises to drastically reduce global consumption of fossil fuels. When coupled with an energy storage device like a Flow Battery from ESS Inc., these renewable energy sources offer low-cost, 24 hour on-demand power regardless of the weather.

Flow battery developers around the world have designed in AvCarb MGLs, felts, fabrics and papers to produce high-performance systems designed to last for decades. While individual system architectures may differ, AvCarb materials are typically used as electrode or bipolar plate backings to promote electrochemical reactions during operation.

For internaltional orders, please ask us for quotes via

Email: contact@scimaterials.cn

Tel: +86 130-0303-8751 / +86 156-0553-2352

Wechat: 15375698751


AvCarb MGL190T Teflon Treated

Product Code

Description

Retail Price (USD$)Lead Time & Availability
113001(5)

AvCarb MGL190T

5wt% PTFE

$19 (10cm*10cm,Item#113001(5)-1010)

$57 (20cm*20cm,Item#113001(5)-2020)

4 weeks
113001(10)

AvCarb MGL190T

10wt% PTFE

$19 (10cm*10cm,Item#113001(10)-1010)

$57 (20cm*20cm,Item#113001(10)-2020)

1 day & In Stock
113001(20)

AvCarb MGL190T

20wt% PTFE

$25 (10cm*10cmItem#113001(20)-1010)

$75 (20cm*20cmItem#113001(20)-2020)

4 weeks
113001(30)

AvCarb MGL190T

30wt% PTFE

$25 (10cm*10cm,Item#113001(30)-1010)

$75 (20cm*20cm,Item#113001(30)-2020)

4 weeks
113001(40)

AvCarb MGL190T

40wt% PTFE

$25 (10cm*10cm,Item#113001(40)-1010)

$75 (20cm*20cm,Item#113001(40)-2020)

4 weeks
113001(50)

AvCarb MGL190T

50wt% PTFE

$25 (10cm*10cm,Item#113001(50)-1010)

$75 (20cm*20cm,Item#113001(50)-2020)

4 weeks

SCI Materials Hub Is Committed to Offering The Best Price & Customer Services!


Worldwide shipping via DHL, SF-Express & other requested carriers.

Payments via Bank Transfer, Paypal, Credit card (via Taobao), Alipay, Wechat-pay are accepted.

Partial references citing our materials (from Google Scholar)


Carbon Dioxide Reduction

1. ACS Nano Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO2 Reduction

The bipolar membrane (Fumasep FBM) in this paper was purchased from SCI Materials Hub, which was used in rechargeable Zn-CO2 battery tests. The authors reported a strain relaxation strategy to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realized an outstanding CO2-to-CO Faradaic efficiency of 96.6% with outstanding activity and durability toward a Zn-CO2 battery.


2. Front. Chem. Boosting Electrochemical Carbon Dioxide Reduction on Atomically Dispersed Nickel Catalyst

In this paper, Vulcan XC-72R was purchased from SCI Materials Hub. Vulcan XC 72R carbon is the most common catalyst support used in the anode and cathode electrodes of Polymer Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Microbial Fuel Cells (MFC), Phosphoric Acid Fuel Cells (PAFC), and many more!


3. Adv. Mater. Partially Nitrided Ni Nanoclusters Achieve Energy-Efficient Electrocatalytic CO2 Reduction to CO at Ultralow Overpotential

An AEM membrane (Sustainion X37-50 Grade RT, purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.


4. Adv. Funct. Mater. Nanoconfined Molecular Catalysts in Integrated Gas Diffusion Electrodes for High-Current-Density CO2 Electroreduction

In this paper (Supporting Information), an anion exchanged membrane (Fumasep FAB-PK-130 obtained from SCI Materials Hub (www.scimaterials.cn)) was used to separate the catholyte and anolyte chambers.

SCI Materials Hub: we also recommend our Fumasep FAB-PK-75 for the use in a flow cell.


5. Appl. Catal. B Efficient utilization of nickel single atoms for CO2 electroreduction by constructing 3D interconnected nitrogen-doped carbon tube network

In this paper, the Nafion 117 membrane was obtained from SCI Materials Hub.


6. Vacuum Modulable Cu(0)/Cu(I)/Cu(II) sites of Cu/C catalysts derived from MOF for highly selective CO2 electroreduction to hydrocarbons

In this paper, Proton exchange membrane (Nafion 117), Nafion D520, and Toray 060 carbon paper were purchased from SCI Materials Hub.


7. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

An anion exchange membrane (PiperION-A15-HCO3) was obtained from SCI Materials Hub.


8. Catalysis Communications Facilitating CO2 electroreduction to C2H4 through facile regulating {100} & {111} grain boundary of Cu2O

Carbon paper (TGPH060), membrane solution (Nafion D520), and ionic membrane (Nafion N117) were obtained from Wuhu Eryi Material Technology Co., Ltd (a company under SCI Materials Hub).


Batteries

1. J. Mater. Chem. A Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium–sulfur batteries

Graphene oxide (GO) in this paper was obtained from SCI Materials Hub. The authors introduced a Janus Fe3C/N-CNF@RGO electrode consisting of 1D Fe3C decorated N-doped carbon nanofibers (Fe3C/N-CNFs) side and 2D reduced graphene oxide (RGO) side as the free-standing carrier of Li2S6 catholyte to improve the overall electrochemical performance of Li-S batteries.


2. Joule A high-voltage and stable zinc-air battery enabled by dual-hydrophobic-induced proton shuttle shielding

This paper used more than 10 kinds of materials from SCI Materials Hub and the authors gave detailed properity comparsion.

The commercial IEMs of Fumasep FAB-PK-130 and Nafion N117 were obtained from SCI Materials Hub.

Gas diffusion layers of GDL340 (CeTech) and SGL39BC (Sigracet) and Nafion dispersion (Nafion D520) were obtained from SCI Materials Hub.

Zn foil (100 mm thickness) and Zn powder were obtained from the SCI Materials Hub.

Commercial 20% Pt/C, 40% Pt/C and IrO2 catalysts were also obtained from SCI Materials Hub.


3. Journal of Energy Chemistry Vanadium oxide nanospheres encapsulated in N-doped carbon nanofibers with morphology and defect dual-engineering toward advanced aqueous zinc-ion batteries

In this paper, carbon cloth (W0S1011) was obtained from SCI Materials Hub. The flexible carbon cloth matrix guaranteed the stabilization of the electrode and improved the conductivity of the cathode.


4. Energy Storage Materials Defect-abundant commercializable 3D carbon papers for fabricating composite Li anode with high loading and long life

The 3D carbon paper (TGPH060 raw paper) were purchased from SCI Materials Hub.


5. Nanomaterials A Stable Rechargeable Aqueous Zn–Air Battery Enabled by Heterogeneous MoS2 Cathode Catalysts

Nafion D520 (5 wt%), and carbon paper (GDL340) were received from SCI-Materials-Hub.


6. SSRN An Axially Directed Cobalt-Phthalocyanine Covalent Organic Polymer as High-Efficient Bifunctional Catalyst for Zn-Air Battery

Carbon cloth (W0S1011) and other electrochemical consumables required for air cathode were provided by SCI Materials Hub.


Oxygen Reduction Reaction

1. J. Chem. Eng. Superior Efficiency Hydrogen Peroxide Production in Acidic Media through Epoxy Group Adjacent to Co-O/C Active Centers on Carbon Black

In this paper, Vulcan XC 72 carbon black, ion membrane (Nafion N115, 127 μL), Nafion solution (D520, 5 wt%), and carbon paper (AvCarb GDS 2230 and Spectracarb 2050A-1050) were purchased from SCI Materials Hub.


2. Journal of Colloid and Interface Science Gaining insight into the impact of electronic property and interface electrostatic field on ORR kinetics in alloy engineering via theoretical prognostication and experimental validation

The 20 wt% Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) were purchased from SCI Materials Hub. This work places emphasis on the kinetics of the ORR concerning Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) catalysts, and integrates theoretical prognostication and experimental validation to illuminate the fundamental principles of alloy engineering.


Water Electrolysis

1. International Journal of Hydrogen Energy Gold as an efficient hydrogen isotope separation catalyst in proton exchange membrane water electrolysis

The cathodic catalysts of Pt/C (20 wt%, 2–3 nm) and Au/C (20 wt%, 4–5 nm) were purchased from SCI Materials Hub.


2. Small Science Silver Compositing Boosts Water Electrolysis Activity and Durability of RuO2 in a Proton-Exchange-Membrane Water Electrolyzer

Two fiber felts (0.35 mm thickness, SCI Materials Hub) were used as the porous transport layers at both the cathode and the anode.


3. Advanced Functional Materials Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry-Level Activity and Stability

Anion-exchange membrane (FAA-3-PK-130) was obtained from SCI Materials Hub website.


Fuel Cells

1. Polymer Sub-two-micron ultrathin proton exchange membrane with reinforced mechanical strength

Gas diffusion electrode (60% Pt/C, Carbon paper) was purchased from SCI Materials Hub.


Characterization

1. Chemical Engineering Journal Electrochemical reconstitution of Prussian blue analogue for coupling furfural electro-oxidation with photo-assisted hydrogen evolution reaction

An Au nanoparticle film was deposited on the total reflecting plane of a single reflection ATR crystal (SCI Materials Hub, Wuhu, China) via sputter coater.

Related Products

We Provide A Broad Range of Materials, Instruments & Solutions in Advanced Science and Technologies About Us
Product consultation
Customer service1
Customer service2
After-sales and technical consultation
Customer service1
Customer service2
WeChat Customer Service

Back to top